解决Netbird和Tailscale不能在Linux共存Ping不通的问题

braginini

braginini commented on Nov 7, 2022

Contributor

You can use --netfilter-mode=off when running Tailscale.
This will prevent aggressive packets take over by Tailscale daemon.

It doesn’t exclude the possibility of conflict but chances are low.

 

https://github.com/netbirdio/netbird/issues/544

 

--netfilter-mode (Linux only) Advanced feature for controlling the degree of automatic firewall configuration. Values are either “off”, “nodivert”, or “on”. Defaults to “on”, except for Synology which defaults to “off”. Setting this flag to “off” disables all management of netfilter. Setting to “nodivert” creates and manages Tailscale sub-chains, but leaves the calling of those chains up to the administrator. Setting to “on” means using full management of Tailscale’s rules. Note that if you set --netfilter-mode to “off” or “nodivert”, it is your responsibility to configure the firewall securely for Tailscale traffic. We recommend using the rules installed by --netfilter-mode=on as a starting point.

 

https://tailscale.com/kb/1241/tailscale-up

暂无评论

发送评论 编辑评论


				
|´・ω・)ノ
ヾ(≧∇≦*)ゝ
(☆ω☆)
(╯‵□′)╯︵┴─┴
 ̄﹃ ̄
(/ω\)
∠( ᐛ 」∠)_
(๑•̀ㅁ•́ฅ)
→_→
୧(๑•̀⌄•́๑)૭
٩(ˊᗜˋ*)و
(ノ°ο°)ノ
(´இ皿இ`)
⌇●﹏●⌇
(ฅ´ω`ฅ)
(╯°A°)╯︵○○○
φ( ̄∇ ̄o)
ヾ(´・ ・`。)ノ"
( ง ᵒ̌皿ᵒ̌)ง⁼³₌₃
(ó﹏ò。)
Σ(っ °Д °;)っ
( ,,´・ω・)ノ"(´っω・`。)
╮(╯▽╰)╭
o(*////▽////*)q
>﹏<
( ๑´•ω•) "(ㆆᴗㆆ)
😂
😀
😅
😊
🙂
🙃
😌
😍
😘
😜
😝
😏
😒
🙄
😳
😡
😔
😫
😱
😭
💩
👻
🙌
🖕
👍
👫
👬
👭
🌚
🌝
🙈
💊
😶
🙏
🍦
🍉
😣
Source: github.com/k4yt3x/flowerhd
颜文字
Emoji
小恐龙
花!
上一篇